info @ vagtech.co.uk  |  01525 279513

VAGtech Limited

Frontpage Slideshow (version 2.0.0) - Copyright © 2006-2008 by JoomlaWorks
The 2.0 TFSI engine represents the next generation on from the 1.8T. This newly designed engine from the VAG group is positioned in the same way as the older 1.8T engine. The higher capacity coupled with the latest fueling technology has meant a big hike in power from it's predecessor. In standard trim the 2.0 TFSI produces 200 bhp, it's big brother with a larger K04 turbocharger and upgraded internals producing 260 bhp. The later of the two can be found in the edition 30 GTI, Seat leon cupra and Audi S3. Again the VAG group has given us a fantastic engine with grate potential for tuning. Below is a selection of some of the options available. If you don't see what you are looking for please contact us.

Performance stage1 - 2.0 TFSI (200 BHP)

Performance optimizing by reprogramming engine control system (e.c.u)

Gains vary depending on engine but typically we see an increase between 50 - 60 bhp and the same with torque.

We recommend upgrading the air filter and the dump valve when performing a stage 1 tune.


Performance stage1 - 2.0 TFSI (260 BHP)

Performance optimizing by reprogramming engine control system (e.c.u)

Gains vary depending on engine but typically we see an increase between 40 - 70 bhp and the same with torque.

We recommend upgrading the air filter and the dump valve when performing a stage 1 tune.


Performance stage 2 - 2.0 TFSI (200 - 260 BHP)

With stage 2 we build on what was installed in stage 1. Adding a sports exhaust system will not only give a pleasant soundtrack but also enable the engine to breath more easily adding to it's efficiency and producing more power and torque. With the addition of hi flow sports cats coupled with a sports exhaust system we can carry out a stage 2 performance program to further increase bhp and torque.


Additional components

To further enhance the tuning potential of your car you may consider the following upgrades.

Upgrade the intake system further by adding a cold air intake system like the Carbonio or the Forge CIA.

Adding an additional front mounted intercooler can reduce intake temperatures.


K04 Turbo upgrade -2.0 TFSI (200 BHP)

Using the K04 turbo found on the Audi S3, edition 30 GTI and Seat Leon Cupra we are able to tune the 200 bhp version of the 2.0 TFSI to 300 bhp +. By installing all the necessary components, injectors, intake pipe, fuel pump etc we can convert the 200 bhp engine to be the same spec as the 260 bhp engine. This means we can then reprogram the e.c.u and achieve the same power output as the higher output engines.

Please contact us for further details

 
Joomla Templates by JoomlaShack