Audi RS4 B5 Engine upgrades

Stage 1

• Base Engine: 2.7 V6 Biturbo - 380 BHP
• Performance upgrade by ECU reprogramming (engine control unit remapping)

Please contact us for a Quote.

Stage 2

• Base Engine: 2.7 V6 Biturbo - 380 BHP
• Performance upgrade by ECU reprogramming (engine control unit remapping)
• Performance air filter
• Exhaust system from catalyst back

Stage 2 consists of optimisation of engine management software, performance air filter and Milltek Sport exhaust system. The Milltek exhaust is available in a number of options. Adding a sports exhaust system will not only give a pleasant soundtrack but also enable the engine to breath more easily adding to it's efficiency and producing more power and torque.

Please contact us for a quote.

 Stage 3

• Base Engine: 2.7 V6 Biturbo - 380 BHP
• Performance upgrade by ECU reprogramming (engine control unit remapping)
• Performance air filter
• Exhaust system from turbo back

With stage 3 up to 460 BHP is possible by using Milltek hi flow sports cats coupled with the cat back non resonated system.

Please contact us for a quote.

Audi RS4 B5 Suspension upgrades

Stage 1

Coilover suspension kit replacing standard springs and dampers. Allowing damping and rebound adjustment. Also allowing height adjustment. Fitting includes four wheel laser alignment using our VAG main dealer spec system.

Anti Roll Bar Upgrade

Larger diameter front and rear anti roll bars. Replaces front and rear bars giving reduced body roll and sharper steering response.

Please contact us for a quote. 

Audi RS4 B5 Brake Upgrades

 Please contact us for a quote.

Stage 2

The B7 RS4 brake upgrade removes the original caliper and replaces it with the components found on the B7 RS4, the 8-piston caliper along with the two-piece bell and disk.  Wheel spacers may be required in some cases. Pagid RS4-2 Blue pads are recommended with this upgrade. 

 Brake fluid upgrade

Brake fluid upgrade using Motul RBF600 fluid. A real must for serious drivers.

Motul RBF600 Factory Line brake fluid is a 100% synthetic brake fluid particularly suitable for the demands of racing and for those requiring a high performance brake fluid. This high performance DOT 4 brake fluid is particularly suitable for race applications and exceeds the DOT 5.1 and DOT 3 standards, except for viscosity at - 40°C (-40°F).

RBF 600 has extreme thermal resistance and stability. The very high boiling point (312°C / 593°F) of this brake fluid is better than conventional DOT 5.1 brake fluids and enables effective braking even under extreme conditions.

With its very high wet boiling point (216°C / 420°F), RBF 600 is also great in the rain. RBF600 is superior to conventional DOT 5.1 brake fluid (180°C / 356°F min) and DOT 4 (155°C / 311°F min) brake fluid.

RBF 600 brake fluid is suitable for all types of hydraulic actuated-brake and clutch systems requiring a non-silicone synthetic fluid. RBF600 is specially designed to resist the high temperature of racing brake (steel or carbon) and clutch systems.

RBF 600 Factoryline brake fluid meets standards:

• FMVSS 116
• DOT 4
• SAE J 1703

100% synthetic brake fluid from polyglycol bases.

Please contact us for a quote.

 Audi RS4 B5 Servicing

Regular maintenance of your RS4 is important, particularly if you are a fast road or track day user.  Services available include:-

• Pre and post track day inspection and checks
• Servicing to and above manufacturer standards
• Upgraded oil service using hi performance engine oil.
• Brake fluid change or upgrade
• Gearbox oil change
• Diagnostics and fault finding

Please contact us for a quote.